Samsung Galaxy S Advance USB charging port replacement

If you are experiencing issues with the battery charging of your Samsung Galaxy S Advance, probably the device’s MicroUSB charging port is damaged .
In this article, we will teach you how to repair it by yourself!Italiano

You will need:

– A new USB connector for Samsung Galaxy S Advance GT-I9070 (you can buy it on Ebay);
– A Phillips screwdriver
– A plastic tool;

STEP 1: Turn off the phone, then remove the back cover and the battery. Remove the Sim card and the MicroSD card (if any).

samsung i9070 1    samsung i9070 2

STEP 2: Then, remove all the screws from the back of the device, using a Phillips i9070 3

STEP 3:  Now, gently remove the middle frame, inserting a plastic tool between the glass and the frame itself.

samsung i9070 4    samsung i9070 5

STEP 4: Unplug all the connectors and the antenna cable, as shown in the picture below.

samsung i9070 6

STEP 5: Now, gently “unstick” the volume rocker keys and the power button from the frame.

samsung i9070 7    samsung i9070 8

STEP 6: Unscrew the two screws holding the motherboard. Then help with a plastic tool to disconnect the connector of the charging port.

samsung i9070 9    samsung i9070 10

STEP 7: At this point, remove the logic board.

samsung i9070 11

STEP 8: Tear out the black sticker the covers the charging port’s flex cable.

s avdance 2    s avdance 3

STEP 9: Gently raise the flex cable and remove the USB connector with a plastic tool.

s avdance 4   s avdance 5

STEP 10: Remove the antenna cable from the broken part, insert the spare part and, finally, reassemble the device!!

s avdance 6

DISCLAIMER: Geek’s Lab will not be held responsible for any damage caused by you to your device following this guide.

If you want to thank us, like us on Facebook and Follow us on Twitter!!

Precedente Hard Reset Majestic TAB 397 3G Successivo Come cambiare numero di telefono WhatsApp