You will need:
– A new USB connector for Nokia Lumia 625 (you can buy it on Ebay);
– A Torx T5 screwdriver
– A plectrum or a plastic tool;
STEP 1: Turn off the phone, then remove the back cover. If you find it hard to remove, you can help by inserting a plastic tool near the charging port.
STEP 2: Screw off all the screws from the back of the device. Note that you willl need a Torx T5 screwdriver.
Then, gently remove the middle frame helping with a plastic tool, levering on the hooks.
STEP 3: Disconnect and remove the battery.
STEP 4: Detach the flex cable that connects the charging dock connector to the logic board (rectangle); remove also the antenna cable (circle).
STEP 5: Remove the broken USB connector from the frame, place the new one and the reassemble your device!!
DISCLAIMER: Geek’s Lab will not be held responsible for any damage caused by you to your device following this guide.